What to do if your engine overheats
Tips on What To Do When Your Engine Overheats
We hunted down car cooling system designers to find out what happens when cars overheat (it's not pretty) and what you can do to help prevent a breakdown
Most cars are equipped with warning lights and a pressure relief valve, so if your engine starts to overheat, you'll probably get advance warning before it damages the engine. But don't keep driving. Important steps to follow when the warning light flashes are:
1. Pull over.
2. Turn off your engine.
3. Call for help.
Be a smart car fault finder.
What you need is your
- A BLUETOOTH CONNECTION
- OBDII SCANNER Even a child of 8 years can follow an easy to use guide. Get your own from Amazon store Now
That's it — stop there. Don't even think about touching the radiator cap while you're waiting for a tow truck. The cooling system is highly pressurized. Just loosening the cap a little can set off a geyser of hot coolant.
Also, there's nothing you can do from the side of the road, your car needs to be towed to a professional.
If towing to an auto shop is not an option and you have no choice but to take matters into your own hands, consider following these steps:
4. Wait until the engine completely cools — at least 30 minutes.
You might be able to speed up the cooling process if you can pop the hood with a latch located inside the car cabin. But, do not touch or attempt to open the hood until the engine is completely cool.
5. Check the coolant/antifreeze reservoir.
Typically, this reservoir is a translucent plastic tank near the radiator. If it's empty or low on fluid, and you've allowed time for the engine to cool, refill the tank with new antifreeze.
6. Check hoses for leaks or blockage.
Chances are, if the coolant tank is completely empty or you spot a drip or puddle on the ground, you've got a leak.
How cooling system works?
Yes, you need to know how your engine's cooling system works
Technically, here's what's happening: Heat from your engine is absorbed by coolant (think: antifreeze), which the engine's water pump pushes to the radiator, where it cools and is recirculated back to the engine.
The simple answer? Think of the water pump as a human heart sending blood throughout the body — it keeps pumping coolant through the engine, then back again. Although engines no longer use water for cooling, the term water pump is still used to describe the system that moves coolant through an engine.
The coolant — the fluid that flows through the cooling system — flows from the engine to the radiator, where heat gets released into the atmosphere. That's why the technical name for the radiator is the heat exchanger. It takes the heat out of the coolant, coolant then flows back to the engine to grab more heat. It's a continuous loop.
This is what happens when it doesn't work
When something goes wrong in the cooling system, all components in the engine run at a temperature that's too high, Conkling says. "The engine and coolant heat up, and metal keeps expanding the hotter it gets." Parts of the engine can warp or melt, resulting in costly repair. Depending on the damage, you may even need a new engine.
Hot weather and blasting the AC isn't making your car overheat
If you were speeding through Death Valley in 1973 with the AC blasting, turning it off and slowing your speed might help cool the engine. But modern cars are typically better designed to handle that kind of load, so when your instruments say the car is overheating, the cooling system may be malfunctioning. No amount of letting it cool off in the shade is going to solve the problem.
Chances are, one of three things is happening when a car overheats
And you'll need to take it to a skilled mechanic to find out which one it is. "I had a 2005 car that started blowing coolant all over the road," Mr Usman says "My mechanic ran a diagnostic test and found the issue was a small defect in the radiator cap. You're not going to pinpoint something like that without testing on sophisticated equipment."
Thermostat failure — The cooling system's thermostat works like a heat-sensitive valve. When you start a car, coolant circulates in the engine until it reaches a certain temperature, then the thermostat opens the flow of coolant to the radiator, where heat is released. If the thermostat fails to open, the coolant keeps circulating in the engine and getting hotter, which leads to overheating.
Blocked airflow — As you drive, air is constantly forced through the radiator. This airflow is what removes heat from the coolant and sends it into the atmosphere. Any buildup of material on the front or back side of the radiator (think: leaves, bugs, road debris, snow) can obstruct the flow of air.
Leaking water pump — Over time, coolant gets dirty and deteriorates, and rust and scale can build up in the fluid. This buildup degrades the seals in the pump and can be a common source of coolant leaks.
Pro tips to help prevent your car from overheating
Coolant picks up dirt and particles that decrease its effectiveness. Coolant that looks cloudy or rusty needs to be replaced. Check the appearance of coolant at every oil change.
Regardless of how coolant looks, it should be replaced as often as recommended by the manufacturer of your car, typically every two to five years. (See your owner's manual.)
Use the type of coolant specified by the manufacturer — as in chemical type, not merely brand. Each type contains a different blend of corrosion inhibitors, and using the wrong one can damage your cooling system.
When in doubt, take your car to a professional. Full-service repair shops have access to the latest manufacturer recommendations and have all types of coolant on hand.
Hope this helps, if you have any overheating issue, describe your situation on the comment box below.